Rohde & Schwarz FSQ3 Repair Service
Product model
FSQ3 Signal Analyzer 20 Hz to 3.6 GHzServices
Complete Rohde & Schwarz FSQ3 Signal Analyzer repair and calibration, even after factory support ends. Free estimates and quick turnaround times.
Description
The Rohde & Schwarz FSQ3 is a high-end signal analyzer covering 20 Hz to 3.6 GHz, combining spectrum analysis with wide-bandwidth vector signal analysis of digitally modulated signals. Our full repair facility can repair and calibrate your R&S FSQ3.

Repair prices
Any failures or unforeseen issues identified during the calibration phase will be detailed in an estimate submitted for your approval prior to any further action. Repair charges are determined by the actual time and materials required. Please be aware that customers are responsible for all associated shipping costs, to and from our location. This initial estimate is provided free of charge.
20 Specifications – click to expand
20 Specifications
Benchtop analyzer with color display, Windows-based firmware, and LAN and GPIB remote interfaces.
| Specification | Value |
|---|---|
| Frequency range | 20 Hz to 3.6 GHz |
20 Options – click to expand
20 Options
- B4, OCXO Reference Oscillator
- B25, Electronic Attenuator and Preamplifier
- B72, 120 MHz I/Q Demodulation Bandwidth
- K7, AM/FM/PM Analog Demodulation
- K30, Noise Figure Measurements
- K40, Phase Noise Measurements
- K70, Vector Signal Analysis. K72/K73, WCDMA Analysis
- K91, WLAN Analysis
Located in: Rohde & Schwarz
