Repair and Calibration Services
37217B
37217B Vector Network Analyzer 22.5 MHz to 8.6 GH
Description:
The 37217B provides up to 1601 measurement data points, a built-in hard-disk drive for storing and recalling front panel setups and measurement and calibration data. It is a single-instrument system that contains a built-in signal source, a test set, and an analyzer subsystem.
Services:
We are experts in the repair of the Anritsu 37217B Vector Network Analyzer. Our full service calibration and repair facility can repair and calibrate your Anritsu 37217B Vector Network Analyzer.
Standard Calibration Price:$385
Repair prices::
Any failures or issues that might become present, an estimate will be generated for approval before proceeding. Repair costs are based on the time and material required. Customers are responsible for all shipping costs, both ways. Estimates are free.
Options:
10A High Stability Time Base 11 Rear Panel Extension Links 1A Rack Mount 2A Time Domain Capabilty 3 1 Hz frequency resolution 4 Extermal SCSL-2 Hard Disk Drive Compatibility. 6 Port 2 Test Attenuator 7A GPC-7 Test Port Connector Assy. 7N Type N (m) Test Port Connector Assy. 7NF Type N (f) Test Port Connector Assy. 7S 3.5 mm Test Port Connector Assy.
Specifications:
Frequency Range: 22.5 MHz to 8.6 GHz. Max Signal Into Port 2: +3 dBm 0.0225 to 8.6 GHz. Noise Floor: -95 dBm @ 0.0225 GHz, -98 dBm @ 2 GHz, -98 dBm @ 8.6 GHz. Receiver Dynamic Range (defined as the ratio of the maximum signal level at Port 2 for 0.1 dB compression to the noise floor at Port 2): 98@ 0.0225 GHz, 101@ 2 GHz, 101 @ 8.6 GHz. Port 1 Power: 0 dBm @ 0.0225 GHz to 8.6 GHz. System Dynamic Range (defined as the ratio of the power incident on Port 2 in a through line connection to the noise floor at Port 2 (forward measurements only): 95 @ 0.0225 GHz, 98 @ 2 GHz, 98 @ 8.6 GHz.
Located in: Vector Network Analyzers