Repair and Calibration Services
37247C
37247C Vector Network Analyzer, 40 MHz to 20 GHz
Description:
The Anritsu 37247C Vector Network Analyzer (VNA) is a high performance tool designed to make fast and accurate S-parameter measurements of passive devices across the 40 MHz to 20 GHz range. The Anritsu 37247C Vector Network Analyzer (VNA) integrates a synthesized source, S-parameter test set and tuned receiver into a single compact package that is ideal for bench-top testing.
Services:
We are experts in the repair of the Anritsu 37247C Vector Network Analyzer. Our full service calibration and repair facility can repair and calibrate your Anritsu 37247C Vector Network Analyzer.
Options:
10A HIGH STABILITY TIME BASE
11 Rear Panel Extension Links
1A Rack Mount
2A HI-SPD TIME DOMAIN
3 1 Hz frequency resolution
4 Extermal SCSL-2 Hard Disk Drive Compatibility.
6 Port 2 Test Attenuator
7A GPC-7 Test Port Connector Assy.
7N Type N (m) Test Port Connector Assy.
7NF Type N (f) Test Port Connector Assy.
7S 3.5 mm Test Port Connector Assy.
Specifications:
Frequency Range: 40 MHz to 20 GHz. Dynamic Range ("Receiver Dynamic Range" is defined as the difference between the maximum signal level at Port 2 for 0.1 dB compression and the noise floor. "System Dynamic Range" is defined as the difference between the power incident on Port 2 in a through line connection and the noise floor. High Level Noise (typical): <0.04 dB and <0.5 degrees peak-to-peak variation in a 1 kHz IF bandwidth up to 20 GHz. Max Signal Into Port 2: 20 dBm @ 40 MHz. Noise Floor: -70 dBm @ 0.04 GHz, -98 dBm @ 2 GHz, -96 dBm @ 20 GHz. Receiver Dynamic Range: 90 @ 0.04 GHz, 101 @ 2 GHz, 99 @ 20 GHz. Port 1 Power: 0 dBm. System Dynamic Range: 70 @ 0.04 GHz, 98 @ 2 GHz, 96 @ 20 GHz.
Located in: Vector Network Analyzers