Anritsu (Wiltron) 56100A Repair Service
Product model
56100A Network AnalyzersServices
Our RF/Microwave facility can repair and calibrate your Anritsu Wiltron 56100A Network Analyzer. Free estimates, quick turnaround, veteran owned.
Description
Anritsu 56100A 10 MHz to 50 GHz, Scalar Network Analyzer. Measurements; The 56100A has four detector inputs and two independent channels for measurement and display of detected RF power from Anritsu 560 Series Detectors and SWR Auto testers. Two independent channels display RF power (dBm), Transmission Gain or Loss in (dB), or reflected power. Voltage may be displayed with optional Volt Mode Adapter Cable. Frequency Range: 10 MHz to over 50 GHz in coax using Anritsu 560 Series Detectors and SWR Auto testers. Waveguide measurement components to 110 GHz support transmission, reflection, and power measurements.
Repair prices
Any failures or unforeseen issues identified during the calibration phase will be detailed in an estimate submitted for your approval prior to any further action. Repair charges are determined by the actual time and materials required. Please be aware that customers are responsible for all associated shipping costs, to and from our location. This initial estimate is provided free of charge.
56100A Specifications – click to expand
56100A Specifications
The same inputs can be displayed as ratios of A/R1, A/R2, B/R1, or B/R2.
| Specification | Value |
|---|---|
| Dynamic Range | 76 dB (-60 dBm to +16 dBm) on all channels, useable to -65 dBm |
| Display; Channels | Two channels are used to select and simultaneously display any two inputs from A, B, R1, or R2 |
| Display Resolution | Horizontal: 101, 201, or 401 points over selected frequency range, Vertical: 0.005 dB |
| Scaling Resolution | 0.1 dB to 10 dB per division in 0.1 dB steps with independent control for each channel |
| Scaling Offset Range | -99 dB to +99 dB in 0.1 dB steps |
Located in: Network Analyzers