Keysight (Agilent HP) 8713C Repair Service
Product model
8713C scalar network analyzer 300kHz-3GHzServices
Expert repair and calibration for your Agilent HP 8713C Scalar Network Analyzer. We specialize in obsolete, unsupported equipment. Free evaluations.
Description
The HP 8711C and HP 8713C are easy-to-use RF network analyzers optimizedrnfor production measurements of reflection and transmission parameters. Therninstrument integrates an RF synthesized source, transmission/reflection testrnset, multi-mode receivers, and display in one compact box.
The source features 1 Hz resolution, 50 ms (or faster) sweep time, and uprnto + 16 dBm output power.
The three-channel, dual mode receivers provide dynamic range of greaterrnthan 100 dB in narrowband measurement mode. For measurements ofrnfrequency-translating devices, the network analyzer features broadbandrninternal and external detector inputs. The receivers incorporate digital signalrnprocessing and microprocessor control to speed operation and measurementrnthroughput.
Repair prices
Any failures or unforeseen issues identified during the calibration phase will be detailed in an estimate submitted for your approval prior to any further action. Repair charges are determined by the actual time and materials required. Please be aware that customers are responsible for all associated shipping costs, to and from our location. This initial estimate is provided free of charge.
8713C Specifications – click to expand
8713C Specifications
| Specification | Value |
|---|---|
| Source Characteristics; Frequency Range | 300 kHz to 3.0 GHz |
| Frequency Resolution | 1 Hz |
| Accuracy | <5 ppm |
| Output Characteristics; Power Range (standard) | -5 to 10 dBm |
| Test Port Accuracy and Flatness | ±1.0 dB |
| Signal Purity Harmonics (at +7 dBm) | <-30 dBc |
| Receiver Characteristics; Frequency Range | Narrowband 300 kHz to 3.0 GHz, Broadband 10 MHz to 3.0 GHz |
| AM Delay Characteristics; Apertures | 55.56 kHz |
| Input Amplifier Range | -10 to +13 dBm |
| Resolution | 0.5 ns |
| Range | 30 µs (9000 m) |
| Accuracy | ±4 ns |
| Test Set Characteristics; Reflection Port Match | 30 dB |
| Transmission Port Match | 18 dB typical |
| System Directivity | 40 dB |
| Options | 1EC, 75 ohm System Impedance. 1E1, 60 dB Attenuator. 1C2, IBASIC Capability. 1DA, 50 ohm AM Delay. 1DB, 75 ohm AM Delay. 1CL, DIN Keyboard. 1CM, Rackmount. 100, Fault Location/SRL. 101, Transportable Operating Case plus Fault Location/SRL. 1F7, LAN Interface |
Located in: Network Analyzers