Our full capability facility can repair and calibrate your Agilent E5052A Signal Source Analyzer.We specialize in servicing obsolete, unsupported test equipment.

The E5052A 10 MHz to 7 GHz Signal Source Analyzer features a number of enhanced performance characteristics, partially shown in the key features above. And it offers world's highest measurement throughput and best usability in characterizing VCO or other types of high frequency signal sources, as well as clock jitter evaluation in high-speed data communication systems.

Frequency range 10 MHz to 7 GHz Frequency bands 10 M to 41 MHz 39 M to 101 MHz 99 M to 1.5 GHz 300 M to 7 GHz Offset frequency range Carrier> 400 MHz 1 Hz to 40 MHz (standard) 10 Hz to 40 MHz (Option E5052A-011) 39 MHz ≤ Carrier ≤ 99 Hz 1 Hz to 20 MHz (standard) 10 Hz to 20 MHz (Option E5052A-011) 10 MHz ≤ Carrier ≤ 39 MHz 1 Hz to 5 MHz (standard) 10 Hz to 5 MHz (Option E5052A-011) Enhanced phase noise sensitivity1 Cross-correlation method (standard) Number of correlation: 1 to 10,000 Frequency tracking range 0.4% of carrier frequency IF gain 0, 10, 20, 30, 40, 50 dB (standard) 0, 10, 20 dB (E5053A-011) Input level 10 to 30 MHz –15 to +20 dBm 30 MHz to 7 GHz –20 to +20 dBm Built-in LO phase noise optimization < 150 kHz (optimized for close-in phase noise)> 150 kHz (optimized for far-out phase noise) 1 to 100 Hz offset < ± 4 dB (typical) 100 to 1 kHz offset < ± 4 dB (typical) 1 k to 1 MHz offset < ± 2 dB (typical) 1 M to 40 MHz offset < ± 3 dB (typical) SSB phase noise sensitivity Spurious level 65 dBc (typical)> 1 kHz offset Measurement time