Keysight (Agilent HP) N9039A Repair Service
Product model
N9039A EMI Measurement Receiver with N9039A RF PreselectorServices
Our RF/Microwave facility can repair and calibrate your Keysight Agilent N9039A EMI Receiver. Free estimates, quick turnaround, veteran owned.
Description
The EMI measurement receiver consists of an E4440xA Series PSA with Option 239, N9039A RF preselector and a signal source for filter alignment. A disk is provided with regulatory limit lines for most of the agencies and typical correction factors for a wide variety of transducers. The EMI measurement receiver is CISPR 16-1-1 2006 compliant.
Repair prices
Any failures or unforeseen issues identified during the calibration phase will be detailed in an estimate submitted for your approval prior to any further action. Repair charges are determined by the actual time and materials required. Please be aware that customers are responsible for all associated shipping costs, to and from our location. This initial estimate is provided free of charge.
N9039A Specifications – click to expand
N9039A Specifications
- 8.5 dBuV radiated bands sensitivity (120 kHz RBW, 10dB Atten) (typical)rn±1.2 dB Absolute amplitude accuracy
- 1.2:1 input VSWRrn+9 dBm TOI (typical)
- RF preselection 9 kHz to 1 GHz with N9039A for CISPR 16-1-1 Compliance
- Dual Window display for a closer look
- CISPR bandwidths and detectors
- Transducer factor corrections and limit lines with margins
N9039A Options – click to expand
N9039A Options
- Transient protection in filter mode
- RF Preselector gain and step attenuation in 2.5 dB steps
- Filter alignment using external signal source
Located in: Signal Analyzer