Repair and Calibration Services
8516A S-Parameter test set for 8510A 45MHz-40GHz
Our full service facility can repair and calibrate your Keysight Agilent HP 8516A S-Parameter test set. We specialize in servicing obsolete, unsupported test equipment. Fast!
The Agilent HP 8516A, S-parameter Test Set, is used with the Agilent HP 8510C network analyzer(sold separately) for broadband coaxial measurements from 45 MHz to 40 GHz. The Agilent HP 8516A, S-parameter Test Set, has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors.
Also available are two 90 dB step attenuators (60dB in the 8516A) which allow control of the port 1 and port 2 signal levels.
Opt. 001 = Adds IF switching Opt. 002 = Deletes step attenuators and bias tees Opt. 003 = High forward dynamic range
Located in: Keysight (Agilent HP)