Keysight (Agilent HP) 8516A Repair Service
Product model
8516A S-Parameter test set for 8510A 45MHz-40GHzServices
Complete HP 8516A S-Parameter Test Set repair and calibration, even after factory support ends. Free estimates and quick turnaround times.
Description
The Agilent HP 8516A, S-parameter Test Set, is used with the Agilent HP 8510C network analyzer(sold separately) for broadband coaxial measurements from 45 MHz to 40 GHz. The Agilent HP 8516A, S-parameter Test Set, has an architecture that develops a separate reference channel for each incident port. RF switching is done with a built-in electronic switch. For active device measurements, the test set includes the ability to apply dc bias (external) to the test port center conductors.
Repair prices
Any failures or unforeseen issues identified during the calibration phase will be detailed in an estimate submitted for your approval prior to any further action. Repair charges are determined by the actual time and materials required. Please be aware that customers are responsible for all associated shipping costs, to and from our location. This initial estimate is provided free of charge.
8516A Specifications – click to expand
8516A Specifications
Also available are two 90 dB step attenuators (60dB in the 8516A) which allow control of the port 1 and port 2 signal levels.
8516A Options – click to expand
8516A Options
- Opt. 001 = Adds IF switching
- Opt. 002 = Deletes step attenuators and bias tees
- Opt. 003 = High forward dynamic range
Located in: Network Analyzers